Replacement stainless steel patio heater burner, identical burner fitted to branded
domestic BFX750 patio heaters models. Ideal replacement for non repairable tin or chrome burners fitted to most generic patio heaters sold by
traders. This burner has a stainless steel body and flame screen with latest quick fire controls and factory fitted flame failure device with tilt auto shut-off. It is fully serviceable and spare parts are readily available to keep the burner in tip top condition. Reflector fitting is standard 3 x reflector support bolts to marry with standard one piece reflector. Please note the burner collar fitting is designed to fit a 57mm pole with four self tapping stainless steel bolts (supplied). The picture on the left is the actual burner supplied, please note it does not ship with a reflector, these can be ordered separately - see below.
For unbranded and generic patio heaters measure the pole fitting before ordering, if in doubt please call on 01793 613900 during normal office hours.
| Heater Capacity: |
44,000BTU/h |
| Heat Output: |
5kW to 13kW |
| Heating Area: |
9 Metres |
| Heat Control: |
Variable heat settings |
| Ignition: |
Push Button Piezo Ignition |
| Heat Emitter: |
Whisper quiet stainless steel burner |
| Fuel: |
Propane/Butane |
| Consumption: |
450g/h-870g/h |
| Weight: |
4.7kg |
| Reflector support: |
Fitting with 3 burner support bolts |
| Pole fixings |
Pre-drilled to take 4 screws at base |
| Pole diameter: |
57mm |
To order:
Patio Heater Reflector